Compression tee 90° female thread

Compression tee 90° with female-threaded outlet

The 90° tapped compression tee creates a branch on your PE pipe with a female-threaded outlet. That outlet receives a male-threaded end that screws into it, such as a nipple or an accessory fitting. The two side ends clamp mechanically onto the polyethylene pipe, with no soldering.

Our range of tapped compression tees

• Female-threaded branch : the central outlet is threaded on the inside to receive a male end.
• 90° angle : clean perpendicular branch to connect an accessory or a take-off.
• Clamps onto PE pipe : both side ports clamp onto the polyethylene, with no glue.
• Standard gas thread : standard BSP tapping for a reliable, watertight connection.

Choosing the right female-threaded tee

• Check that the part you connect is male-threaded: it screws into the female tapping of the tee.
• Check both the PE pipe diameter (side clamp) and the tapping size (1/2", 3/4", 1"...).
• Need a male outlet that screws into a female part? Choose our male-threaded compression tee instead.

The Piscine-SAV technical tip: female thread means the thread is on the inside, which is exactly where it gets confused with male. If unsure, send us the reference and our experts will check the thread for you.

With the female-threaded compression tee you prepare a clean, removable branch without a torch. Our team confirms the right diameter and tapping with you before you buy.