Compression Wall Plate
Compression wall plates for PE pipe
Want to feed a wall tap from your polyethylene pipe? The compression wall plate links the PE pipe to a threaded outlet fixed to the wall: on the pipe side, mechanical clamping without glue; on the wall side, a thread ready for your tap. Our experts help you choose the right diameter and thread.
Our range of compression wall plates
- Female-threaded plate: female thread to screw a tap on directly.
- Screw-to-wall plate: drilled backplate for a stable, lasting fixing.
- Compression pipe side: mechanical clamping of the PE pipe, no glue or welding.
- All diameters: from Ø 20 to Ø 32 mm with 1/2 or 3/4 thread to suit the tap.
Choosing the right compression wall plate
- Measure the outside diameter of the PE pipe to connect.
- Check the outlet thread (1/2, 3/4...) for your tap or valve.
- Do not confuse it with a PVC waste fitting or a solvent-weld pressure plate.
The Piscine-SAV technical tip: seal the thread with PTFE tape or hemp before screwing on the tap. If unsure, send us the reference.
Delivery across Europe and advice from our experts: connect your wall tap with complete confidence.
There are 5 products.
Sort by:
