Compression valve

Compression valve for PE pipe

The compression valve lets you shut off the water on a polyethylene (PE) pipe with no soldering tools at all. The fitting clamps mechanically onto the pipe, so you can isolate a section of your circuit in seconds, ideal for servicing your filtration or winterising without draining the whole system.

Our range of compression valves

• Quarter-turn valve : quick open and close in a single move, no effort required.
• Mechanical clamping : tightens onto the PE pipe with a compression ring, no glue or torch.
• Sturdy body : built for pressurised water and outdoor pool circuits.
• Several diameters : from 20 to 63 mm to match your polyethylene pipe.

Choosing the right compression valve

• Measure the outer diameter of your PE pipe (20, 25, 32, 40, 50 or 63 mm): the valve must match it exactly.
• A compression valve fits flexible PE pipe: for a threaded or copper circuit, choose our brass fittings instead.
• Check the flow direction and leave a straight length of pipe for a watertight clamp.

The Piscine-SAV technical tip: if you are unsure about the diameter, send us the reference or a photo of your pipe and our experts will check compatibility for you before you buy.

With a compression valve you gain peace of mind: a clean, flame-free fit and the certainty of shutting off the water in the right place. Our team is always here to guide you.