Equal Compression Tee 90°

Equal compression tees 90° for PE pipe

Want to create a branch on your irrigation network? The equal compression tee 90° clamps mechanically onto three PE pipes of the same diameter, without glue or welding: slide the pipes in, tighten the nuts, and the branch is watertight and removable. Our experts help you choose the right diameter.

Our range of equal compression tees

• 90° branch: to run a line perpendicular to the main pipe.
• Three identical outlets: same diameter on all three tee branches.
• Triple clamping: a nut per branch for reliable mechanical hold.
• All diameters: from Ø 20 to Ø 63 mm to suit your PE network.

Choosing the right equal compression tee

• Measure the outside diameter of the PE pipe (identical on all three branches).
• Cut each pipe square and deburr before insertion.
• Do not confuse it with a PVC waste fitting or a solvent-weld pressure tee.

The Piscine-SAV technical tip: insert each pipe fully to the stop in the tee before tightening the three nuts. If unsure about the diameter, send us the reference.

Delivery across Europe and advice from our experts: branch your PE network with complete confidence.