Compression End Cap

Compression end caps for PE pipe

Need to close a polyethylene pipe end? The compression end cap clamps mechanically onto the pipe, without glue or welding: slide the cap on, tighten the nut, and the line end is watertight and removable at will. Our experts help you target the right diameter.

Our range of compression end caps

• Line end cap: to close an irrigation branch cleanly.
• Pressure-test cap: to check the tightness of a PE network.
• Removable: to reopen and extend the line later without breaking anything.
• All diameters: from Ø 20 to Ø 63 mm to suit your PE pipe.

Choosing the right compression end cap

• Measure the outside diameter of the PE pipe to close.
• Check for the seal and the clamping ring inside.
• Do not confuse it with a push-fit or solvent-weld PVC waste cap.

The Piscine-SAV technical tip: insert the pipe fully to the stop in the cap before tightening the nut for a perfect closure. If unsure, send us the reference.

Delivery across Europe and advice from our experts: close your PE pipe with complete confidence.