Sand filter valve
Sand filter valve: control backwash and filtering in one move
Filter, backwash, rinse, waste: it's the 6-position multiport valve that commands all these functions of your sand filter. A well-sealed valve means water that doesn't leak to waste and a filter that keeps its full power. At Piscine-SAV you'll find the complete valve or the exact wear part, without confusing it with ordinary circuit valves. Unsure about mounting or diameter? Tell us your filter's brand and our experts confirm the reference. Fast delivery throughout Europe.
Our range of valves and parts
- Complete 6-way valves: in top (on the filter) or side versions, ready to fit.
- Handles and covers: to restore crisp operation and clean locking of the positions.
- Spider gasket: the key sealing part that separates each port inside.
- O-rings and PTFE tape: to redo the seal of the connection to the filter.
- Springs, spindles and flaps: the internal parts that ensure precise switching.
Choosing the right valve
- The mounting position: top or side, depending on whether the valve sits above or on the side of the filter.
- The connection diameter: often 1"1/2 or 2", to read off your installation.
- If in doubt: give us the filter's brand and model and we'll identify the compatible valve.
The Piscine-SAV technical tip: always stop the pump before changing the valve position. Operating it under pressure crushes the spider gasket and creates leaks between ports: with the pump off, your valve lasts for years.
Browse our range and keep a precise, perfectly sealed valve. Expert advice, secure payment and fast delivery across Europe: with Piscine-SAV, your filtration stays under control.
