Hayward SP1022B Flat Winterizing Plug for 1-1/2" Pool Discharge Nozzle - Flat Seal, Ø 46 mm Thread

Hayward SP1022B Flat Winterizing Plug for 1-1/2" Pool Discharge Nozzle - Flat Seal, Ø 46 mm Thread

Name: Hayward SP1022B Flat Winterizing Plug for 1-1/2" Pool Discharge Nozzle - Flat Seal, Ø 46 mm Thread
Brand: Hayward
SKU: JB-SP1022B
Price: 5.99 EUR
Availability: InStock

Hayward

€5.99

Tax included

Delivery from €4.15 to a pickup point · to your home from €7.16
Rates and delivery times

Hayward SP1022B Flat Winterization Plug for 1"1/2 Discharge Nozzle

This genuine Hayward winterizing plug screws into a 1-1/2" threaded pool discharge nozzle to seal it during the winter, once the water level has been lowered or the system has been protected against freezing. It comes with a flat gasket.

Hayward Part No. SP1022B – flat head – short thread L. 8 mm × Ø 46 mm – flat gasket included.

Sold individually.

4 items available in our warehouse

Reference JB-SP1022B

Your legal guarantee rights

Customer service
Via our contact form

Home or pickup-point delivery
Dispatched the same day, Monday to Friday, for all orders placed before 10 a.m.

Secure payment
Credit card, PayPal, SSL-protected site

Description

Introduction to the SP1022B Winterization Plug

During winterization, the water level is often lowered below the discharge nozzles, and the pipes are drained. The winterization plug screws into the nozzle after removing its tip: it seals the pipe and prevents water from re-entering it.

The SP1022B model has a flat head and a short thread (8 mm). It is sealed by a flat gasket, which is included.

Technical Specifications

Brand: Hayward (original part)
Manufacturer Part Number: SP1022B
Type: flat-head winterization plug
Thread: 1½" – length 8 mm, Ø 46 mm
Gasket: flat gasket, included
Weight: approximately 20 g
Packaging: sold individually

Compatibility

Hayward discharge nozzles with 1-1/2" threads (Hayward exploded view: 1-1/2" adjustable nozzle);
Hayward vacuum inlets for liner pools SP1408ELL and SP1411ELL (SCP supplier data);
replacement for a lost or damaged SP1022B cap.

ℹ️ Good to Know

There is a version with a long thread (33 mm) and an O-ring: part no. SP1022CE. Before ordering, compare the thread length of your old plug (8 mm for the SP1022B) and its diameter (Ø 46 mm).

⭐ Tip from the team

Make sure the O-ring is properly seated and clean before screwing it in, and tighten it by hand: over-tightening can damage the nozzle’s threads. In the spring, store the cap with its O-ring for the following winter.