- Out-of-Stock
Injection valve for Redox or pH controller, 1/2" for 4x6 mm tubing - Part Number 11100088 images
Injection valve for Redox or pH controller, 1/2" for 4x6 mm tubing - Part Number 11100088
1/2" Injection Valve for Pool pH or Redox Controller
This injection valve (part number 11100088) is installed on the dosing pump of your automatic pH or Redox controller.
It combines a suction valve and an injector into a single 49-mm-long unit. Its lip-seal check valve injects the solution with precision and provides a tight seal.
It screws onto a 1/2" threaded fitting (outer thread diameter: 2 cm) and accommodates a 4x6 mm peristaltic pump tube. It replaces a scaled-up or worn valve.
All dimensions are listed: please check them before ordering. In the event of an ordering error, return shipping is at your expense, and a part that has been installed or has come into contact with treatment products cannot be returned.
Description
An injection valve for your dosing pump
The injection valve is the component through which the dosing pump delivers the treatment chemical (pH adjuster or liquid chlorine) into the pool’s plumbing system.
This model, part number 11100088, combines the suction valve and the injector. It is suitable for pH controllers and redox controllers.
A check valve with a lip seal
The lip seal allows the treatment chemical to flow in only one direction. When the dosing pump is off, pool water does not flow back up into the tube.
Simple installation on a 1/2" fitting
The valve screws onto a 1/2" threaded fitting (outer thread diameter: 2 cm), such as a standard pipe clamp mounted on a PVC pipe.
It is connected to a 4x6 mm flexible peristaltic pump tube.
Technical Specifications
- Brand: Jardiboutique
- Manufacturer part number: 11100088
- Product type: injection valve for Redox or pH controller
- Valve: check valve with lip seal
- Thread: 1/2" (2 cm outer diameter)
- Installation: on a 1/2" screw-on fitting
- Compatible tubing: 4x6 mm flexible tubing
- Total length: 49 mm
- Tightening: by hand only (no pliers)
ℹ️ Good to know
A scaled-up or worn valve can interfere with proper product injection. Replacing it ensures stable test results and reliable water treatment.
All dimensions are listed: please verify them before ordering. In the event of an ordering error, return shipping is at your expense, and any part that has been installed or has come into contact with water treatment products cannot be returned.
⭐ Tip from the team
Screw the valve in by hand, without pliers: over-tightening can crack the plastic or damage the threads.
Rinse the valve regularly with clean water. This prevents crystals of liquid chlorine or acid corrector from clogging the internal lip seal.
-
Brand
-
ReferenceJB-64121340
-
EAN133760311000355
-
Compatible brandMICRODOS
-
ColorBlack
-
Manufacturer's reference11.100.088
How do I know if my injection valve needs replacing?
A scaled or worn valve injects the treatment product poorly. Readings become unstable and water correction is less reliable: it is time to replace it.
What is the lip-seal check valve for?
The lip seal lets the product through in one direction only. When the dosing pump is off, pool water does not flow back into the tubing.
How should I maintain the injection valve?
Rinse it regularly with clean water. This way, crystals of liquid chlorine or acid corrector do not block the internal lip seal.
Which dimensions should I check before ordering?
1/2" thread (outer diameter 2 cm), 4x6 mm tubing, overall length 49 mm. Valve part number: 11100088.
What happens if I order the wrong part?
All dimensions are given: please check them before ordering. In case of an ordering error, return shipping is at your expense, and a part that has been fitted or has been in contact with treatment products cannot be taken back.
8 other products in the same category
- Out-of-Stock
Clients also bought
- Out-of-Stock
