1-inch (110 mm) strainer (manifold) for AstralPool sand filter 4404300917, set of 2 images
1-inch (110 mm) strainer (manifold) for AstralPool sand filter 4404300917, set of 2
Replacement Strainer (Collector Arm) for AstralPool Sand Filter
This set contains 2 replacement strainers, AstralPool part number 4404300917.
A strainer is a collector arm: it is a small slotted tube screwed into the bottom of the filter, beneath the sand.
The strainer allows filtered water to pass through while trapping the sand.
1-inch male thread, 110 mm long.
These strainer screens are compatible with AstralPool Aster, Vesubio, and Volcano filters, among others.
A broken strainer allows sand to enter the pool. Replace it as soon as you see sand at the bottom of the pool.
All dimensions are listed: please check them before ordering. In the event of an ordering error, you are responsible for return shipping costs, and a part that has been installed cannot be returned.
Description
Technical Specifications
- Part: strainer (collector arm) for sand filter
- Manufacturer part number: AstralPool 4404300917
- Thread: 1-inch male
- Length: 110 mm
- Color: gray
- Contents: 2 strainers
- Package weight: approximately 50 g
Compatible Filters
This genuine AstralPool strainer fits sand filters equipped with 1-inch, 110 mm-long screw-on strainers.
AstralPool Filters
- Aster with side valve, diameters 350, 450, and 500 mm
- Aster high-efficiency with side valve, 500 mm diameter
- Vesubio and Volcano, 450 mm diameter
- Rapidpool with side valve, diameter 400 mm
- Atlas with side valve, diameter 500 mm
- UVE with side valve, diameter 350 mm
Other filters
- Superpool, 500 mm diameter (TCNG and TR versions)
ℹ️ Good to know: Measure the strainer on your filter before ordering. The length (110 mm) and thread size (1 inch) must match.
A filter often contains several strainers: count them and order the necessary number of sets.
All dimensions are listed: check them before ordering. In the event of an ordering error, return shipping is at your expense, and an installed part cannot be returned.
Why replace a strainer?
Over time, the plastic in a strainer becomes brittle.
A cracked or broken strainer allows sand to pass through the filter.
The sand then returns to the pool through the discharge nozzles.
Signs of a damaged strainer
- Sand at the bottom of the pool after filtration
- Sand in the pump strainer
How to replace a strainer
- Turn off the pump and close the valves.
- Empty the filter, then remove the sand.
- Unscrew the damaged strainer from the central manifold.
- Screw the new strainer on by hand, without using excessive force.
- Refill with clean sand, then perform a backwash (washing the sand against the flow) before restarting the system.
⭐ Tip from the team: Take advantage of replacing the strainers to change the filter sand.
Also replace all fragile strainers at the same time: this way, you’ll avoid having to empty the filter a second time.
-
Brand
-
ReferenceJB-4404300917
-
In stock12 Items
-
EAN133760311005121
-
Compatible brandASTRAL POOL
-
ColorGrey
-
longueur11
-
Number of pieces in the pack2
-
Poids du produit0.05
