90° PVC pressure tee, Ø 25 mm, glue-on, 3-way female fitting for rigid tubing images
90° PVC pressure tee, Ø 25 mm, glue-on, 3-way female fitting for rigid tubing
Ø 25 mm PVC pressure tee for creating a 90° branch
This 90° pressure PVC tee has three Ø 25 mm female sockets for gluing.
It allows you to branch off from an existing pipe to create a right-angle branch, with the same diameter on all three outlets.
It bonds directly to rigid PVC pressure pipe with an outer diameter of 25 mm.
This is the standard fitting for adding a branch to a sprinkler system, a pool installation, or a PVC water circuit.
Simple installation: deburring, gluing, and joining—no special tools required.
Description
A T-fitting to split a pipe run into two
The equal T-fitting is the fitting to use whenever you need to split a water flow into two directions or add an outlet to an existing pipe.
Its three sockets have the same diameter: 25 mm.
Specifications
- Type: 90° equal tee (3-way)
- Connection: 3 female sockets for gluing
- Diameter: Ø 25 mm (for pipe with an outer diameter of 25 mm)
- Material: Pressure-rated PVC
- Sold individually
Examples of use
- Create an additional outlet on a PVC irrigation system
- Add a branch to a swimming pool system (bypass, sample tap, drain)
- Install a rigid PVC water system: pond, tank, water collection
How to Successfully Bond PVC
1. Cut the pipe at a right angle and deburr it.
2. Clean the pipe and the inside of the socket with a PVC cleaner.
3. Apply PVC pressure-sensitive adhesive to both surfaces.
4. Press the parts together firmly in one smooth motion, without twisting, and hold for a few seconds.
5. Allow the glue to dry for the time specified by the manufacturer before submerging in water.
ℹ️ Good to Know
The Ø 25 mm refers to the outer diameter of the pipe: a “25” pipe fits into the socket of the T-fitting.
This fitting is glued; it cannot be disassembled once dry. For a disassemblable connection, use a union fitting.
⭐ Tip from the team: Do a “dry run” (without glue) and mark the pipe and T-fitting with a pencil; when you’re ready to glue, you’ll immediately know the correct orientation of the outlet.
❓ Frequently Asked Questions
Is this T-fitting suitable for flexible tubing?
No, it is designed for rigid PVC pipe with an outer diameter of 25 mm.
For flexible tubing, you’ll need a corrugated coupling or a compression fitting.
Do all three outlets have the same diameter?
Yes, it’s an equal tee: all three outlets are 25 mm.
To transition from one diameter to another, use a reducing tee or a reducer.
What kind of adhesive should you use?
A special PVC pressure adhesive, applied after using a PVC cleaner, to ensure a strong and leak-proof bond.
-
Brand
-
ReferenceJB-IN-STI1025
-
In stock12 Items
-
EAN133701451020186
-
Diameter25 mm
