Refill pack of 100 Lovibond DPD No. 3 Evo tablets for photometers and comparators – Ref. 511420BT
DPD No. 3 Evo tablets for measuring total chlorine in swimming pools
This refill pack contains 100 Lovibond No. 3 Evo DPD tablets.
It is used to measure the total chlorine in the water using a photometer or a colourimeter.
The DPD No. 3 Evo tablet is used in conjunction with a DPD No. 1 tablet to determine total chlorine.
The DPD No. 1 tablet alone measures free chlorine.
The DPD method is a common analytical method for monitoring swimming pool water.
According to the manufacturer, the Evo tablet can replace the standard DPD No. 3 tablet.
The pack contains 100 tablets, which is enough to carry out 100 total chlorine measurements.
Description
Refill pack of 100 DPD No. 3 Evo tablets
The Lovibond DPD No. 3 Evo tablet is used to measure total chlorine in water.
It is suitable for use with a photometer or colourimeter from the Lovibond range.
When used in combination with a DPD No. 1 tablet, they give the total chlorine reading.
Features
- Contents: 100 tablets
- Reagent: DPD No. 3 Evo, for total chlorine
- Brand: Lovibond
- Manufacturer’s reference: 511420BT
- Net weight: approx. 28 g
Instructions
- Fill a cuvette with 10 mL of the water to be analysed.
- Add one DPD No. 1 tablet and one DPD No. 3 Evo tablet.
- Crush the tablets by turning them gently.
- Close the cuvette and invert it several times to dissolve the tablets.
- If using a photometer, allow the reaction to take place for 2 minutes before taking a reading.
Compatibility
The manufacturer states that the test is carried out using Lovibond photometers, for example the MD 100, MD 110, MD 200, MD 600, MD 610, MultiDirect or SpectroDirect.
It uses a 24 mm cuvette.
The stated measurement range is from 0.01 to 6.0 mg/L of chlorine.
ℹ️ Good to know: the Evo tablet can replace the standard DPD No. 3 tablet. The manufacturer also states that a DPD No. 4 tablet can replace the No. 1 and No. 3 duo.
⭐ The team’s tip: carry out the test immediately after taking the sample. Rinse the cuvette thoroughly before each test, as some cleaning products can skew the result.