900 mm wire saw with two handles for PVC, PP, and PE plastic pipes - Griffon images
900 mm wire saw with two handles for PVC, PP, and PE plastic pipes - Griffon
900 mm Wire Saw for Cutting Plastic Tubes and Pipes
This Griffon wire saw cuts plastic tubes and pipes: PVC, PVC-C, PP, and PE. The cutting wire measures 900 mm and is held by two red handles, one at each end.
Wrap the wire around the pipe, then pull alternately on the two handles. It is particularly handy in hard-to-reach places where a conventional saw cannot be used: pipes against a wall, under a sink, in a trench, or behind equipment.
Description
Cutting a Pipe Where a Saw Won't Fit
A wire saw doesn’t require space around the pipe—you just need to be able to run the wire behind it. It’s the ideal tool for cutting a pipe that’s already been installed, flush against a wall, or inside a manhole.
Features
Materials Cut
Plastic pipes and tubes: PVC, PVC-C, polypropylene (PP), and polyethylene (PE).
Dimensions
Cutting wire length: 900 mm, with two red handles.
Brand
Griffon (Griffon part number 6307762), distributed by Sorodist under the part number SCIEFIL.
ℹ️ Good to know
Before cutting a pipe in place, shut off the water supply and drain the pipe. After cutting, deburr the end of the pipe before soldering or connecting it.
⭐ Tip from the team
Keep the wire taut and pull steadily, without jerking, keeping the wire perpendicular to the pipe: this will ensure a straighter cut and make the connection easier.
-
Brand
-
ReferenceSO-SCIEFIL
-
In stock53 Items
-
EAN138710439201320
-
Manufacturer's referenceSCIEFIL
